Auto Connection - Toyota INNOVA Owner's Manual

Check that a confirmation screen is displayed when the operation is
4
complete.
If an error message is displayed, follow the guidance on the screen to try
again.
Depending on the type of Bluetooth
necessary to perform additional steps on the device.
When connecting from the Bluetooth
■
Registering an additional device

Select "Connect" on the Bluetooth
For more information: P. 450
Selecting a registered device

Select "Connect" on the Bluetooth
For more information: P. 452

Auto connection

Make sure that "Bluetooth
When you register a Bluetooth
vated. Always use this mode and leave the Bluetooth
place where a connection can be established.
Vehicles without smart entry & start system

When the engine switch is turned to the "ACC" or "ON" position, the
system will search for a nearby Bluetooth
tered.
Vehicles with smart entry & start system

When the engine switch is turned to ACCESSORY or IGNITION ON
mode, the system will search for a nearby Bluetooth
registered.
Next, the system automatically connects with the most recent of the
phones connected to in the past.
*
: The Bluetooth
Bluetooth SIG, Inc.
INNOVA_OM_OM71301E_(GE)
®
*
Power" is turned on. (P. 457
®
device, auto connection will be acti-
®
word mark and logos are registered trademarks owned by
5-20. Connecting Bluetooth
device being connected, it may be
®
audio control screen
®
audio control screen. (P. 459)
®
audio control screen. (P. 459)
®
®
device you have regis-
®
device you have
®
453
5
device in a