Dialing From Call Histories; Pbap Automatic Transfer - Toyota INNOVA Owner's Manual

Dialing from call histories

Select "All calls", "Missed calls", "Incoming calls" or "Outgoing calls"
1
using the "TUNE >" or "< SELECT" button, and press the "SETUP
ENTER" button.
Select a desired number using the "TUNE >" or "< SELECT" button,
2
and press the off-hook switch.
The following operations can be performed:
● Registering a number as a speed dial
Press
(from
● Deleting the selected number
Press
PBAP (Phone Book Access Profile) Automatic Transfer
If your cellular phone is not PBAP (Phone Book Access Profile) com-
patible, the contacts cannot be transferred.
Depending on the type of Bluetooth
perform additional steps on the phone when transferring contact data.
Setting automatic transferring of the phonebook to on. (P. 345)
1
Default setting is on.
After HFP connection is successful, the phone's contact data and
2
history are automatically transferred, and then "Transfer waiting" is
displayed when "TEL" mode is selected.
● If automatic transfer is successful, "Transferred" is displayed except
for Power off mode.
● If automatic transfer is failed, "Failed to transfer part of contact" or
"Transfer failed" is displayed.
If phone book memory is full, "Failed to transfer part of contacts" is
displayed.
● Automatic transfer is canceled by pushing
hook switch.
● When "Display setting" is set to off, it doesn't display the PBAP
automatic transfer result confirmation. (P. 339)
INNOVA_OM_OM71301E_(GE)
(Add S. Dial) and then press the desired preset button
[1] to [5]).
(DELETE) and press
®
5-9. Bluetooth
(YES).
®
phone, it may be necessary to
(CANCEL) or On-
351
Phone
5