Table of Contents
Advertisement
2-2
Coral IPx 800 Installation Manual
precautions are taken (such as special ventilation) to prevent corrosive emissions
from the batteries. Check local building codes for additional requirements.
7.
Verify that the installation area is located no closer than 20 feet (6.1m) from electric
devices that produce large electro-magnetic fields or high levels of radio frequency
energy. Possible EMF sources are radio transmitters, electric arc welding machines,
copying machines, electric motors, refrigeration units, power transformers, electric
load centers, and main circuit breaker panels.
8.
Verify that the installation area provides reasonable security to the system. Room
construction should include solid, reinforced walls and a locking door.
The Coral system, and the service it provides to users, represents a substantial
investment. During an emergency, reliable service may be crucial in protecting
lives and property. Access to the system should be limited and controlled to
prevent unauthorized tampering. The system uses hazardous working voltages
and extremely high short circuit currents. The area must be protected against
damage by, and injury to, unqualified personnel.
Advertisement
Table of Contents
Troubleshooting
