Tadiran Telecom Coral IPx 800 Series Installation Procedure And Hardware Reference Manual page 267

The connectors provide metallic paths from the cards to the various power and signal
busses of the system and for peripheral cards, to the Input/Output (I/O) connectors.
Power Supply Unit
The Coral IPx 800 cage includes one PS19 AC, DC, or DC-D power supply unit located
on the left side of the cage. The power supply unit is attached to the cage with two
screws that ensure that the unit is grounded. These power supply units are described
in detail in
Chapter 7.
Control Cards
The control cards are housed in the right side of the main cage. These cards are
described in detail in
Chapter 8.
The Coral IPx 800 includes the MEX-IP2 and the HDC control cards.
Peripheral Cards
Coral IPx 800 includes eight peripheral cards in the main cage and 11 peripheral cards
in the expansion cage.
Service Cards
A service card can be housed in slot 9 of the IPx 800M cage and in slot 1 of the IPx
800X cage.
Buffer Card
A PX card is installed in slot 1 of the first IPx 800X cage when two expansion cages are
installed.
Configuration Jumpers
The configuration jumpers in the all cages are located on the backplane. See
Figure 6-26
and 6-27. For further information see
Figure page 6-39, Coral IPx 800M Main Cage.
6-27
Cage Description