The IMC8/16 card provides memory space for the generic feature software of the
Coral IPx 800 systems. The generic feature software determines the operation of
telephony functions of the system. The IMC8/16 uses flash memory technology to
provide high-reliability, non-volatile storage for the generic software and system
database, combined with the capability of field software upgrade.
The DBM/DBX is an optional card that expands the database memory space, which
stores the system's configuration. The DBM/DBX is generally not required. It is likely
to be required in special applications (see
DBX) or when the
page 8-7,
DBM,
page 8-9,
CoraLINK with MAP/CLA card is implemented.
The optional MAP card is used for FlexCT CTI (Computer Telephone Interface)
applications, Coral Telephony Gateway interface, and other applications. The MAP
card incorporates the application processor and Ethernet 10Base-T interface circuitry
for the CoraLINK computer-telephony integration (CTI) link. CoraLINK uses TCP/IP
protocol and complies with ECMA 179, ECMA 180, and ECMA 269 phase 3 standards
(CSTA III). CoraLINK also supports the Novell TSAPI protocol, the Intel Dialogic
CT-connect, and IBM Callpath.
The MAP attaches to an expansion connector on the MCP-IPx2 card in piggyback
fashion. The 10Base-T Ethernet interface appears at a RJ-45 connector on the front
panel of the MAP card.
Refer to the Control Card Installation Manual for detailed information on each common
control card.
8-2
Coral IPx 800 Installation Manual