Tadiran Telecom Coral IPx 800 Series Installation Procedure And Hardware Reference Manual page 103

30. Verify that the following two messages appear on the PI screen:
For SERVICE/SOFTWARE installation menu HIT <CTRL I> NOW
*************************
CHK RAM
END CHK RAM
Custom Init Code...
The second message may appear after two or three minutes, following several
short messages (as described in
CCS is on the air ......
(ROOT)
CCS xx.xx.xx
Copyright (c) 2001-yyyy .........................
NAME - (site name)
SAU # -
The second message indicates that the system has initialized properly and is
capable of processing calls. After entering the password, the version level of the
generic feature software is indicated where the x's appear in the line that reads
CCS xx.xx.xx.
31. Insert the PX card fully into slot 1 of the first IPx 800X expansion cage.
17) that appear during system start-up:
Step
Initial Powerup Tests
3-13