Tadiran Telecom Coral IPx 800 Series Installation Procedure And Hardware Reference Manual page 101

17. If the following message appears on the PI device during system start-up:
For SERVICE/SOFTWARE installation menu HIT <CTRL I> NOW
*************************
CHK RAM
END CHK RAM
Custom Init Code...
CHECKING PROG-MEM
PROG-MEM IS O.K
CHECKING CODING MEMORY
CODING MEMORY IS O.K.
END CHECKING CODING MEMORY
CHECKING MEX CONTROLS
END CHECKING MEX CONTROLS
CHECKING SAU #
END CHECKING SAU #
Patch Loaded...
CHECKING CODING MEMORY
CODING MEMORY IS O.K.
END CHECKING CODING MEMORY
CHECKING MEX CONTROLS
END CHECKING MEX CONTROLS
CHECKING SAU #
END CHECKING SAU #
CHECK CHECKSUM...
END CHECK CHECKSUM
And the following second message appears after two or three minutes, following several
short messages that appear during system start-up:
Initializing CCS ...
Partial initialization phase starting
System configuration identified ......
CCS is on the air ......
(ROOT)
CCS xx.xx.xx
Copyright (c) 2001-yyyy ...............
NAME - (site name)
SAU # -
!
Initial Powerup Tests
3-11