Replacing a DC Power Fuse
1.
Verify that the DC power source is disconnected from the cage.
Electrical Hazard. Contact with live wires could cause shock, burn, or death. Verify that
all DC power is disconnected from the cage before opening.
2.
Open the DC power cover. See
3.
Replace only with the same type and rating of fuse. A spare fuse is located on the
DC power cover.
4.
Close the DC power cover. See
5.
Replace the spare fuse on the DC power cover with the same type and rating of
fuse.
page 6-16, Opening the DC Power Cover
page 6-17, Closing the DC Power Cover
Cage Description
for details.
for details.
6-19