Calling Rules - Eaton VoCALL 16 Installation And Operation Manual

12. panel to panel calls
A MX16 panel can call any other MX16 panel by lifting the handset and dialing
its number.
Dialing number: XX00 ; XX = panel ID
The panel receiving the call, can start the conversation by picking the handset and
pressing the Accept call button.
0100:PANEL 00
PANEL HANDSET
13. Call symbols terminology

12.2 Calling rules

1. Outstations can call panels with one step operation – lifting the handset (Type A),
pressing the button (Type B)
2. Panels (MX16) can call any outstation and other panels by dialing their number.
3. Dialing number of any device = XX YY.
a. XX = Panel ID
b. YY = 00 (for panel) or Outstation address (01 to 16)
4. Nomenclature:
a. Local call: Call between panel and outstation directly connected to it.
b. Network call: Call between panel and an outstation which is not directly
connected to it.
INStALLAtIoN ANd opErAtIoN mANuAL 25-16760-A January 2020 www.eaton.com
09:29
05/01/20
Handset in place
Handset Off-hook
Call incoming
Call in progress
Call on hold
Call disabled
Figure 56. Symbols for call state
12. Communication
0200:PANEL 00
PANEL HANDSET
09:29
05/01/20
79