Configuration; Webserver - Eaton VoCALL 16 Installation And Operation Manual

13. Configuration

13. Configuration

13.1 Webserver

VoCALL 16 provides an ethernet based application ('Webserver') aiding configuration
of parameters and monitoring of installation. System should be in learned /
addressed state for the utility to be used.
N ote: Using webserver for editing parameters puts the system in engineering mode.
No calls are allowed across the system when in engineering mode.
System will not initiate engineering mode if there is an active call on
N ote:
the system.
N ote: It is also possible to configure all parameters via LCD.
Connect to Webserver
Webserver is configured to work with Static IP address on a peer to peer connection
between PC and MX16 panel.
Settings required on PC/Laptop – for Windows 10 PC
100
INStALLAtIoN ANd opErAtIoN mANuAL 25-16760-A January 2020 www.eaton.com