Event Log - Eaton VoCALL 16 Installation And Operation Manual

16. Logging facility

16.3 Event log

VoCALL 16 facilitates the logging of important system events. The event log is
accessible using the display under "Event Log" option. Date and time stamp is
recorded for all events.
Event Type Log Text
Power Cycle SOFTWARE RESET
POWER RECYCLE
LOW POWER RESET
BROWN OUT RESET
Configuration TIME SET
Parameters
DATE SET
SERVICE DATE SET
SYSTEM SETTINGS SET
DISPLAY SETTINGS SET
USER PIN CHANGED
USER SETTING CHANGED
WEBSERVER SETTINGS SET
Config Backup RESTORE DISPLAY SETTINGS
/ Restore
RESTORE SYSTEM SETTINGS
RESTORE PIN SETTINGS
RESTORE WEBSERVER
SETTINGS
RESTORE WEBSERVER
USER SETTINGS
PANEL CONFIG BACKUP
PANEL CONFIG RESTORE
OUTSTATION LEARN
SYSTEM LEARN
128
INStALLAtIoN ANd opErAtIoN mANuAL 25-16760-A January 2020 www.eaton.com
Event Log (1-230)
01/01/19 01:23.50
Sounder Silenced
02/03/19 10:54.30
Sounder Silenced
06/03/19 09:05.50
Accept Faults
Description
Reset caused by software eg. After factory defaults.
Loss of power to the board.
Reset caused due to inadequate power supply
Reset of system caused by Watchdog
Time is set on MASTER panel
Date is set on MASTER panel
Service date is set on MASTER panel
System settings updated from default values
Display settings updated from default values
Change in PIN of any USER
Change in settings of any USER
Change in default Webserver settings
Display settings restored to factory default values
System settings restored to factory default values
User settings restored to factory default values
Webserver settings restored to factory default values
Webserver user settings restored to factory default values
Configuration file backed up on SD card for panel
Configuration settings restored from a file for panel
Configuration file backed up on SD card for network
Configuration settings restored from a file for network
1
2
3