Hydraulic Installation (D And E Models Only) - Landoll 1550 Series Operator's Manual

3-9 HYDRAULIC INSTALLATION (D AND E MODELS ONLY)

3-9.1 Pin cylinder rod to wing bracket using cle-
vis pin.
o
3-9.2 Install 90 elbow with restrictor into each
port of hydraulic cylinders.
3-9.3 Install Hose 1 from hydraulic manifold to
the base end of the left hydraulic cylinder.
3-9.4 Install Hose 2 from hydraulic manifold to
the rod end of the left hydraulic cylinder.
3-9.5 Install Hose 3 from hydraulic manifold to
the rod end of the right hydraulic cylinder.
ITEM PART NUMBER
1 1-397-010299-14
1-397-010299-10
2 1-397-010299-16
1-397-010299-02
3 1-397-010299-02
1-397-010299-24
4 1-397-010299-10
1-397-010299-02
5 1-397-010299-02
1550 SERIES HYDRAULIC HOSE
DESCRIPTION
HOSE ASSEMBLY 24”
HOSE ASSEMBLY 41”
HOSE ASSEMBLY 44”
HOSE ASSEMBLY 60”
HOSE ASSEMBLY 60”
HOSE ASSEMBLY 80”
HOSE ASSEMBLY 41”
HOSE ASSEMBLY 60”
HOSE ASSEMBLY 60”
3-9.6 Install Hose 4 from hydraulic manifold to
the base end of the right hydraulic cylinder.
3-9.7 Install coupling Hoses 5 from the front of
the hydraulic manifold to the 1/2 male cou-
plers. Connect the coupler fittings to the trac-
tor.
3-9.8 Install o-ring plug in rear ports of hydraulic
manifold.
D
E
D
E
D
E
D
E
D AND E
USED ON MODEL
3-11