Coulter Assembly - Landoll 1550 Series Operator's Manual

3-7 COULTER ASSEMBLY

3-7.1 Assemble coulter shank to coulter assem-
bly using coulter stop weldment and 5/8-11 x
1-1/2 square head set screw. Install 3/8 x 2
spring slotted pins in coulter shank.
3-7.2 Install the shank and coulter assembly to
the frame with the coulter clamps and plates
using 1/2-13 x 6 hex head cap screws and
hex lock washers (See Figure 3-4).
3-8
Figure 3-4 Coulter Assembly
3-7.3
3-7.4
Use square head cup point set screws
through hole in clamp to hold coulter shank
in place.
Attach the coulter blade to the coulter as-
sembly using 1/2-13 x 1-1/2 round head
square neck screws, hex lock washers, and
hex nuts.