Tractor Preparation - Landoll 1550 Series Operator's Manual

4-1 TRACTOR PREPARATION

The 1550 Series of the In-row Ripper may be
used on tractors equipped with category II or III
three-point hitches. Before attaching the In-row
Ripper, prepare the tractor as follows:
4-1.1 The rear tractor tires should be inflated
equally and ballast added according to the
tractor operator's manual.
4-2
Figure 4-1 3 Point Hitch Setup
4-1.2 For mounted type models, install front end
weights as needed on tractor to maintain sta-
bility.