Operation And Maintenance - Landoll 1550 Series Operator's Manual

OPERATION AND MAINTENANCE

DANGER
COULTER BLADES ARE SHARP. DO
NOT ALLOW COULTERS TO ROLL
OVER OR FALL ON ANY PART OF THE
BODY. DO NOT ALLOW WRENCHES
TO SLIP WHEN WORKING NEAR
COULTER BLADES. DO NOT CLIMB
OVER MACHINE ABOVE COULTER
BLADES. FAILURE TO STAY CLEAR
OF COULTER BLADE EDGES MAY RE-
SULT IN SERIOUS PERSONAL INJURY
OR DEATH.
DANGER
NEVER ALLOW ANYONE TO RIDE ON
THE IN-ROW RIPPER AT ANY TIME.
ALLOWING A PERSON TO RIDE ON
THE IN-ROW RIPPER MAY RESULT IN
SERIOUS PERSONAL INJURY OR
DEATH OF THAT PERSON.
WARNING
ALL HYDRAULICALLY ELEVATED
EQUIPMENT MUST BE LOCKED OUT
OR LOWERED TO THE GROUND
WHEN SERVICING OR WHEN EQUIP-
MENT IS IDLE, TO PREVENT ACCIDEN-
TAL LOWERING. FAILURE TO TAKE
MEASURES TO PREVENT ACCIDEN-
TAL LOWERING MAY RESULT IN SERI-
OUS PERSONAL INJURY.
CAUTION
WHENEVER TRANSPORTING FARM
IMPLEMENTS ON PUBLIC ROADS, IT
IS THE RESPONSIBILITY OF THE OP-
ERATOR TO ABIDE BY STATE AND
LOCAL LAWS CONCERNING WIDE
LOADS, SPEED, SAFETY EMBLEMS,
AND SAFETY LIGHTING EQUIPMENT.
DRIVE AT SAFE SPEEDS, PARTICU-
LARLY WHEN ROUNDING CORNERS,
CROSSING ROUGH GROUND, ON
HILLSIDES, TO PREVENT TIPPING.
4
4-1