Table of Contents
Advertisement
WARNING!
TROUBLESHOOTING.
PROBLEM
The wet/dry vacuum will not
operate.
The dust comes out from the
motor cover.
Reduced efficiency and motor/
speed vibration.
The remote control will not
operate.
TROUBLESHOOTING
TO REDUCE THE RISK OF ELECTRIC SHOCK, UNPLUG BEFORE
POSSIBLE CAUSE
No power supply.
Faulty power cord.
Collection tank is full.
Switch in the wrong position.
The cartridge filter is missing or
damaged.
Vacuum has been used to
collect fine dust, such as dry
wall dust, fireplace soot, or
ash, without a fine dust filter
equipped.
There is a blockage in the
nozzle, hose, or the collection
tank inlets. The cartridge filter is
clogged by fine dust.
The remote control is not paired
with the vac.
The battery is dead.
SOLUTION
Check the power supply, cord,
breakers, and fuses.
Unplug and check the power
cord. If damaged, have it
repaired by a professional.
Empty the collection tank.
Press the ON 'I' button on the
power head.
Attach or replace the cartridge
filter.
Remove the standard cartridge
filter and install the appropriate
fine dust cartridge filter.
Check nozzle, hose and
collection tank inlets for
blockage. Take off the filter and
clean it or install a new cartridge
filter.
Reset the remote control using
the instructions on page 16.
Replace the battery.
17
Advertisement
Table of Contents
