System Connector - Sony Ericsson S700i Working Instruction, Mechanical

3.16

System Connector

•
Disassemble the phone as described in 1 Disassembly.
Step-by-Step Instructions
1 Slide the main PBA backwards from the system
connector with your fingers.
NOTE!
Don't bend the PBA to much upwards.
2 NOTE!
Sometimes it needs quite a lot of force until the
system connector become loose.
With a slot screwdriver gently bend against the
hinge frame holding (under the system
connector) until the system connector become
loose.
3 Remove the old system connector with a blunt
pair of tweezers.
Assemble a new system connector with your
fingers.
NOTE!
Press the system connector firmly to the bottom
of the case key front cavity.
4 Correctly mounted system connector.
NOTE!
Don't forget to reassemble the cover system
connector I/O (3.13).
•
Assemble the phone as described in 2 Reassembly.
3/00021-1/FEA 209 544/89 B

Company Internal Sony Ericsson Mobile Communications AB
Working Instruction, Mechanical
25(51)