3.30
Receiver
•
Disassemble the phone as described in 1 Disassembly.
Step-by-Step Instructions
1
NOTE!
1. Be careful with the tweezers.
2. Do not touch or damage the dual receiver
contact springs with your fingers or with the
assembly tools.
Remove the old receiver with a blunt pair of
tweezers.
Place a new receiver into the frame cavity. Press
gently on the receiver with the tweezers to
secure a good fit.
NOTE!
Press the receiver to the bottom of the cavity.
•
Assemble the phone as described in 2 Reassembly.
3.31
Microphone
•
Disassemble the phone as described in 1 Disassembly.
Step-by-Step Instructions
1
Remove the old microphone with a dentist hook.
NOTE!
1. Do not press in the center of the microphone
(damage may occur).
2. Do not touch or damage the dual microphone
contact springs with your fingers or with the
assembly tools.
Place a new microphone into the frame cavity.
Press gently on the microphone edges with a
blunt pair of tweezers to secure a good fit.
NOTE!
Press the microphone to the bottom of the
cavity.
•
Assemble the phone as described in 2 Reassembly.
3/00021-1/FEA 209 544/89 B
Company Internal
Sony Ericsson Mobile Communications AB
Working Instruction, Mechanical
37(51)