3.25
Key FPC
•
Disassemble the phone as described in 1 Disassembly.
Step-by-Step Instructions
1
NOTE!
Remove all the FPC key equipment connected
by a adhesive with a blunt pair of tweezers like
the pictures shows.
Be very careful not to damage the FPC
connector clamp when closing it. The clamp
may fall off and then the connector must be
replaced (electrical repair).
Open the FPC connector with the
flex film assembly tool and remove the flexfilm
from the connector.
2
The FPC key is held in place to the frame BB
with three hooks (by the arrows)
3
Gently remove the old FPC key with a blunt pair
of tweezers and with your hands like the picture
shows.
3/00021-1/FEA 209 544/89 B
Company Internal
Sony Ericsson Mobile Communications AB
Working Instruction, Mechanical
33(51)