Sony Ericsson S700i Working Instruction, Mechanical page 10

Step-by-Step Instructions
22 NOTE!
Be careful not to damage the two main cables
when folding them.
Lift the hinge assembly from the display case
and work the end of each cable assembly one at
a time through the hole in the hinge assembly.
(1).
The Bush Hinge , transparent, (2) may fall off
from the hingemechanism – put it back on the
hinge-mechanism so you can keep a track on it.
23 NOTE!
Be careful not to scratch the phone with the
opening tool.
Open the LCD case with the opening tool. Begin
like the pictures show (1).
Then gently move the tool along the gap both
ways until the front is loose on all sides (2).
If necessary do the same thing on the other side.
24 NOTE!
Be careful not to damage the case key front and
the case LCD rear.
Open the upper cabinet with caution.
Remove the case LCD front from the case LCD
rear (1).
3/00021-1/FEA 209 544/89 B

Company Internal Sony Ericsson Mobile Communications AB
Working Instruction, Mechanical
10(51)