3.20
FPC hinge
•
Disassemble the phone as described in 1 Disassembly.
Step-by-Step Instructions
1
NOTE!
1. Notice how the FPC hinge is assembled
before you remove it.
2. Be careful with the tweezers.
Gently bend with a blunt pair of tweezers under
the FPC hinge until it become loose.
2
Turn the LCD frame around and do the same
thing again on the other side.
3
NOTE!
If necessary, clean the surface of the frame with
Isopropyl alcohol before you assemble new
adhesives.
The picture shows the FPC hinge separated from
the LCD unit frame.
Assemble a new FPC hinge in the reverse
direction.
•
Assemble the phone as described in 2 Reassembly.
3/00021-1/FEA 209 544/89 B
Company Internal
Sony Ericsson Mobile Communications AB
Working Instruction, Mechanical
29(51)