Sony Ericsson S700i Working Instruction, Mechanical page 5

Step-by-Step Instructions
4 NOTE!
Be careful with the dentist hook. It`s easy to
scratch the frame.
Use the dentist hook to gently bend/remove the
panel key front.
NOTE!
If necessary – clean the surface of the panel key
front cavity with Isopropyl alcohol.
5 Remove the two case key front screws at the
bottom of the phone.
NOTE!
1.Removed screws cannot be reused and must be
scrapped.
2. Turn the phone around.
6 Remove the four case key rear screws .
NOTE!
Removed screws cannot be reused and must be
scrapped.
7 NOTE!
Be careful not to scratch the phone with the
opening tool.
Open the phone with the front opening tool
Begin as the picture shows (1).
Then gently move the tool along the gap both
ways until the case key rear is loose on all sides
(2).
If necessary do the same thing on the other side.
3/00021-1/FEA 209 544/89 B

Company Internal Sony Ericsson Mobile Communications AB
Working Instruction, Mechanical
5(51)