Sony Ericsson S700i Working Instruction, Mechanical page 9

Step-by-Step Instructions
18 Remove the four hinge frame screws at the
bottom of the case key front.
NOTE!
Keep track of the different sizes of screws used
inside the phone.
NOTE!
The four removed screws cannot be reused.
19 Remove the upper (1) and lower (2) hinge frame
holdings with the flex film assembly tool.
20 NOTE!
Be careful not to damage the two cable
assemblies when removing the inner half of the
case key front.
Remove the case key front.
21 Remove the four hinge screws (1), then the two
case LCD rear screws (2).
NOTE!
Keep track of the different sizes of the screws.
Removed screws cannot be reused and must be
scrapped.
3/00021-1/FEA 209 544/89 B

Company Internal Sony Ericsson Mobile Communications AB
Working Instruction, Mechanical
9(51)