Sony Ericsson S700i Working Instruction, Mechanical page 13

Step-by-Step Instructions
1 Start like this when reassembling the upper
cabinet.
NOTE!
Make sure that all of the LCD buttons (1) are
correctly assembled.
2 NOTE!
Make sure that the front glas is clean.
Use air blow equipment if necessary.
Place the LCD unit in the case LCD front by
hand
NOTE!
If you are going to assemble a new front:
Don`t forget to remove the protection foil
inside the front, with a pair of tweezers. Be
careful not to scratch the glass with the
tweezers.
3 NOTE!
Be careful not to damage the two main cables
when sliding them through the hinge
mechanism.
NOTE!
Don't forget the bush hinge (1)
Gently fold each end of the cables until they can
slide through the center hole of the
hingemechanism.
3/00021-1/FEA 209 544/89 B

Company Internal Sony Ericsson Mobile Communications AB
Working Instruction, Mechanical
13(51)