Setting Parameters Through Configuration Files; Options List Settings - Vertical 480I Administrator's Manual

Setting Parameters through Configuration Files

The following are the parameters that can be used to configure the 480i phone through
the configuration files - aastra.cfg and <mac>.cfg. The "aastra.cfg" file configures the
settings server wide, while the <mac> configures only the phones with the MAC address
for which the file is named. The settings in the "aastra.cfg" file will be overridden by the
settings that also appear in the <mac> cfg file.

Options List Settings

This section contains parameters for changing some options list settings on the 480i.
Select "<mac>.cfg" for individual phone settings, and "aastra.cfg" for settings to be
implemented server-wide.
Parameter live dialpad
Description
Format
Default Value
Range
Example
Parameter audio mode
Description
Format
Default Value
Range
Example
10 SIP 480i IP Phone Admin Guide
Configurable through the phone's options list or the
configuration files
Flag to enable live dialpad mode
Boolean (0:off; 1:on)
0
0-1
live dialpad: 1
Configurable through the phone's options list or the
configuration files
Sets the audio output mode
Integer (O: speaker; 1: headset; 2; speaker/headset; 3:
headset/speaker)
0
0-3
audio mode: 2