GCA70–250
11
Symptom
INTERCOM light flashing.
HOLD light flashing with no line
on hold.
MUTE light on.
SPEAKER light on steady.
Error Tone
(three steady tones)
You can not receive a voice
announce call.
Troubleshooting Your Telephone
Troubleshooting
Your Telephone
Your messaging is set. Press
INTERCOM, then dial # 02 and
hang up.
Another telephone has activated
your message waiting light. Press
INTERCOM and then press
HOLD to retrieve message. This
action will call party who activated
light. Once you have received
message, party who activated light
(while still talking to you) must
press INTERCOM to turn off the
light.
MUTE is activated. To cancel,
press MUTE.
Background music feature
activated even though the system
does not provide background
music. To cancel, press
INTERCOM then dial # 1.
May occur when incorrect buttons
are pressed during speed dial
programming. For example, if a
button has a line assigned to it,or
was not enabled for speed dial
programming by the installer.
Voice announce block has been
activated. To cancel, press
INTERCOM then dial # 2.
LCD Speakerphone Reference Manual 11 – 1
Possible Cause