Using The Overflow Transfer - Comdial 8312S System Reference Manual

GCA70–250

10.12 Using The Overflow Transfer

By using this feature during peak calling periods, calls that normally ring
at your station will also ring at the overflow station. If the installer has
programmed the OVERFLOW feature access button, you can press this
button to select overflow transfer. You can either change the overflow
station selected by the installer, or if none was selected, you can enter
your own selection from your station.
To set the overflow transfer feature,
1. Press the installer-programmed OVERFLOW button. If an
overflow attendant is programmed, the light next to the
OVERFLOW button will illuminate, and incoming calls will ring
at both stations.
To designate an overflow station,
1. Press INTERCOM.
2. Dial #
0 0 5.
4. Dial overflow station number:
dial 1001–1480 for stations 1–480.
•
To cancel the overflow transfer feature,
1. Press the OVERFLOW button again.
Using The Attendant Features
LCD Speakerphone Reference Manual 10 – 23