Automatic Set Relocation - Comdial 8312S System Reference Manual

GCA70–250

7.25 Automatic Set Relocation

If your installer has equipped your system with automatic set relocation,
when you move your telephone to a new location, the system will give
you a choice (through a display prompt) as to whether you want to keep
your previous programming or use the programming in the new location.
To maintain the extension number and programming features
from the old location,
1. Connect the telephone line cord to the new jack.
2. Note the flashing HOLD light and press the HOLD button while
the light is still flashing (your telephone immediately assumed the
features from the previous location),
—OR—
do nothing until the HOLD light stops flashing (your telephone
automatically assumes the features from the previous location).
To assume the extension number and programming features
from the new location,
1. Connect the telephone line cord to the new jack.
2. Note the flashing HOLD light and press the # button while the
light is still flashing (your telephone immediately assumes the
features from the new location).
Using The Other Telephone Features
LCD Speakerphone Reference Manual 7 – 29