GCA70–349
11
Symptom
INTERCOM light flashing.
MUTE light on.
SPEAKER light on steady.
Error Tone
(three steady tones)
You cannot receive a voice announce
call.
Troubleshooting Your Telephone
Troubleshooting
Your Telephone
Your messaging is set. Press
INTERCOM, then dial # 02 and
hang up.
MUTE is activated. To cancel, press
MUTE.
Background music feature activated
even though the system does not
provide background music. To
cancel, press INTERCOM then dial
# 1.
May occur when incorrect buttons
are pressed during speed dial
programming. For example, if a
button has a line assigned to it,or
was not enabled for speed dial
programming by the installer.
Voice announce block has been
activated. To cancel, press
INTERCOM then dial # 2.
Large Screen Speakerphone Manual 11 – 1
Possible Cause