Setting A Do Not Disturb; Condition At Your Station - Comdial 8312S System Reference Manual

Using The Other Telephone Features

7.14 Setting A Do Not Disturb

Condition At Your Station

This feature keeps calls from ringing at your LCD speakerphone and
makes your station appear to be busy to intercom calls. If your installer
has programmed your station to have this feature, you can enable it as
needed.
Generally, callers cannot override this feature. They hear two quick tone
bursts every two seconds when they call a telephone that is set to the do
not disturb mode. However, the installer may program some telephones
with the ability to override a do not disturb condition at another
telephone.
You can program a permanent do not disturb button to provide yourself
with quick access to this feature if you wish. See the programming
section of this user's guide for details.
To enable DND, proceed as follows:
1. Press OPTIONS.
2. Press NEXT until the DND option appears.
3. Press DND.
4. Press ON.
5. Press EXIT.
6. Press SPEAKER to end.
To disable the DND condition,
1. Repeat the above procedure, but press OFF instead of ON at step 4.
To set a do not disturb condition at your telephone when a call
rings at your station,
1. Hear ringing and notice incoming call information in display.
2. Select DND option. Ringing will stop, caller will hear the do not
disturb tone, and your telephone will remain in DND until you
disable the feature (described above).
To override a do not disturb condition at another telephone, use
the procedure detailed in section 3.10.
7 – 12 LCD Speakerphone Reference Manual
GCA70–250