I User Functions - Zodiac Heat Select ZS500 Series Instructions For Installation And Use Manual

2.4 I User functions

2.4.1 Adjusting the temperature set point:
• Press to increase the temperature by 0.5 °C,
• Press to reduce the temperature by 0.5 °C.
The heat pump stops automatically when the pool reaches the required temperature.
2.4.2 Using the different operating modes
This heat pump has three operating modes:
V1
100%
V2
75%
V3
50%
Most economical and quietest
Objective
When to use
Low heating requirements and
silent operation desired
2.4.3 Locking/unlocking the keyboard
Press and hold and
9
Eco Silence
no intervention is needed to
operation
Adapts the power automatically to requirements.
Maintaining the temperature
No desire to need to intervene
for 3 seconds:
Operating mode
Smart
Smart temperature control,
change the operating mode
on the device
or
Boost
To increase to the desired
temperature quicklly.
Starting the pool
.