User Functions; Lock/Unlock The Keypad - Zodiac AquaLink Z350iQ Quick Start Manual

4

User functions

Lock/Unlock
the keypad
+
3 seconds
Adjust the temperature setpoint
/
Press from the main
screen to adjust the value
Activate/deactivate the Cooling mode (disabled by default)
The activation of the Cooling mode is validated by 3 successive blue flashes.
Long press until
screen displays
''COOL''
Select the Heating modes
The heat pump has 3 active operating modes for
adjusting its operating speed to the power that is
required and the mode that is selected:
• ''BOOST'' mode
• ''SMART'' mode
• ''SILENCE'' mode
Disable the LED strip (lit by default)
Press and hold from
the main screen:
the screen displays
''COOL''
Refer to the online manual for
further details about operating
modes and the LED strip behaviour.
Set automatic lock (enabled by default)
Until ''P19''
Press hold
and
/
Increase or decrease
temperature
Confirm
the screen displays
''LED''
/
Confirm
Confirm (automatic if
more than 30 seconds
of inactivity)
/
ON (enabled) or OFF
(disabled)
Press from the main
screen:
the indicator stops
in front of one of the 3
modes
ON (enabled)
Confirm
or OFF (disabled)
❷ Use
/
ON (enabled) or
Confirm
OFF (disabled)
Recommended
temperature: 28 °C
Max temperature: 32°
Confirm
Confirm
7