Power Cable - TA Instruments TMA 2940 Operator's Manual

Installation

Power Cable

NOTE:
TMA 2940 Thermomechanical Analyzer
Figure 2.16
Front Panel of TMA
Showing POWER Switch
CAUTION:
2–26
Connect all other cables and gas lines before
connecting the power cable to a wall outlet.
1. Make sure the instrument POWER switch
(see Figure 2.16) is in the OFF (O) position.
2. Plug the power cable into the TMA.
Before plugging the TMA power cable into the
wall outlet, make sure the instrument is compat-
ible with the line voltage. Check the label on the
back of the unit to verify the voltage.
3. Plug the power cable into the wall outlet.
TA I TMA 2940
NSTRUMENTS