Electrical Connections - H.C Duke & Son Electro Freeze GENESIS Series Operator’s Manual With Illustrated Parts List

ELECTRO FREEZE Soft Serve Model GEN-5099
2.4

Electrical Connections

compressors require one power supply for
each side of the freezer. Each side of the
freezer operates independently.
size, wire ampacity and electrical
specifications.
provided for proper power connections.
the junction box located mid-level behind
the left side panel.
permissible. All materials and connections
must conform to local codes and the
National Electrical Code.
rotation must be clockwise as viewed
from the front of the freezer.
4
CAUTION
To prevent accidental
electrical shock, a positive
earth ground is required.
1. Double freezers with two
2. Check the data plate for fuse
3. Refer to the wiring diagram
4. Electrical connections are made in
5. Use a flexible connection when
6. For 3 phase freezers, beater shaft
WARNING
Warning: When installing the machine,
insert an all pole disconnect, adequately
sized according to freezer nameplate
marking with electrical contact spacing of
3mm minimum. This should be within sight
of the freezer.
185242