H.C Duke & Son Electro Freeze GENESIS Series Operator’s Manual With Illustrated Parts List page 60

ELECTRO FREEZE Soft Serve Model GEN-5099
13.1 MTS Troubleshooting Tables
PROBLEM PROBABLE CAUSE
1. Air meter plugged.
No air (overrun).
2. Air tube pinched.
1. Air meter too large.
Too much air,
2. Air leak between pickup tube and hose.
overrun too
high – popping
3. Air line hose cracked – sucking air.
problems.
4. Defective or missing duckbill valve.
1. Swing Clamp knob loose.
Mix shoots out
2. Transfer hose worn.
air meter.
3. MTS pressure too high.
Keep your freezer in excellent
condition — always contact
your Electro Freeze Distributor
for replacement parts and
maintenance scheduling.
NOTE: Contact your authorized Electro Freeze Distributor for
instructions prior to warranty compressor replacement.
48
REMEDY
1. Clean or replace air meter.
2. Replace tube.
1. Install smaller air meter.
2. Replace as needed.
3. Replace air line hose.
4. Replace valve.
1. Tighten.
2. Replace hose.
Contact your Electro Freeze
3.
Distributor for service.
QUALITY PARTS
PROTECT
YOUR
INVESTMENT
185242