H.C Duke & Son Electro Freeze GENESIS Series Operator’s Manual With Illustrated Parts List page 19

ELECTRO FREEZE Soft Serve Model GEN-5099
4 Part Names and Functions
The following descriptions apply to figure 4-1. The number preceding the part name
corresponds to the number in the figure.
1.)
2.)
3.)
4.)
5.)
6.)
7.)
185242
HEAD - DISPENSE: Encloses the
freezing cylinder and provides an
opening for product to be dispensed.
O-RING - PLUNGER: Seals the
plunger in the dispense head. Must
be lubricated to seal and slide
properly.
O-RING - HEAD: Seals the
dispense head to the freezing
cylinder. Must be lubricated.
PLUNGER - SIDE Seals the product
opening in the dispense head when
closed. Allows product to flow when
open.
O-RING - PLUG: Seals the air bleed
plug in the dispense head.
PLUG - AIR BLEED: Seals the air
bleed opening in the dispense head
when closed. Allows excess air to be
removed from the cylinder during the
filling process.
ROD - PLUNGER: Starts the freezer
when dispensing. Must be in place
before freezer will operate.
(continued)
8.) PLUNGER - CENTER: Seals the
product opening in the dispense
head when closed. Allows product to
flow when open.
9.) PIN - HANDLE: Secures the handle
to the dispense head.
10.) HANDLE - DISPENSE SIDE: Opens
and closes the plunger to start and
stop the flow of product from the
freezer.
11.) KNOB - HAND: Secures the
dispense head to the freezing
cylinder.
12.) HANDLE - DISPENSE CENTER:
Opens and closes the plunger to
start and stop the flow of product
from the freezer.
9