Attaching To Tractor - Landoll 1230 Series Operator's Manual

4-5 ATTACHING TO TRACTOR

4-5.1 Hitch
The implement is equipped with a combination
clevis / tongue swivel hitch. For a tongue-type trac-
tor drawbar, use the clevis hitch end. If the tractor
has a clevis-type drawbar, use the tongue hitch
end (See Figure 4-8).
WARNING
TO AVOID SERIOUS INJURY OR
DEATH, STOP TRACTOR ENGINE,
SHIFT TO PARK POSITION OR SHIFT
TO NEUTRAL AND SET BRAKES BE-
FORE LEAVING TRACTOR.
Figure 4-8 Combination Swivel Hitch
4-8
Note: Relieve internal hydraulic system pres-
sure before leaving tractor seat.
a. Hitch tractor to implement with a 1" (25 mm)
pin (minimum diameter). Secure pin in place
with a clip pin.
b. Remove jack and pin in storage position on
top of hitch tube (See Figure 4-9).
c. Connect hydraulic hoses for frame and disc
cutter circuits to tractor couplers. Connect so
when tractor lever is pulled rearward, imple-
ment raises.
IMPORTANT
THOROUGHLY CLEAN HOSE COUPLERS AND
TRACTOR COUPLINGS BEFORE CONNECTING
HOSES.
Figure 4-9 Implement Hitch