Table of Contents
Advertisement
3-2 AFTER ASSEMBLY - SAFETY
WARNING
1 . B E S U RE ALL NUTS , BO LT S ,
OTHER FASTENERS AND HYDRAULIC
FITTINGS ARE PROPERLY TIGHT-
ENED. REFER TO THE BOLT TORQUE
CHART.
2. BE SURE ALL SAFETY GUARDS
AND SAFETY LOCKING DEVICES ARE
IN PLACE AND FUNCTION PROPERLY.
3-3 ASSEMBLY INSTRUCTIONS
3-3.1
The terms "right" and "left", "front" and
"rear", refer to the machine as viewed by fac-
ing in the direction of forward travel.
3-3.2
Open all bundles. Do not mix parts of one
bundle with those of another. Place all bun-
dles where they will be easy to access.
CAUTION
BEFORE OPERATING THE MACHINE,
BE SURE TO READ THE SAFETY AND
OPERATION SECTIONS OF THE OP-
ERATOR'S MANUAL.
CAUTION
BEFORE DELIVERING THE MACHINE,
REVIEW MACHINE MAINTENANCE,
OPERATION AND SAFETY WITH THE
CUSTOMER.
3-3.3
Neatly arrange parts and tools within easy
reach of work area.
3-3.4
Use the correct grade of bolt in the proper
locations as indicated. Refer to the bolt
torque chart for descriptive markings on bolt
heads.
3-3.5
After completing each assembly step, re-
view next step in procedure before proceed-
ing with that step.
3-3
Advertisement
Table of Contents
