Table of Contents
Advertisement
4-2 ROCKSHAFT LOCKUP OPERATION
Figure 4-4 Decal P/N 360459
Figure 4-5 Lockup in Lockup Position
Figure 4-6 Lockup in Storage Position
4-6
To install lockup:
a. Raise implement to full height.
b. Remove lockup from storage position and
attach lockup to frame (See Figure 4-5).
c. Insert lockup pin and install clip pin.
d. Attach lockup to rockshaft in storage posi-
tion when not in use (See Figure 4-6).
4-2.1
SMV Sign
a. The sign is mounted on the rear bar left of
the machine centerline (See Figure 4-7).
Figure 4-7 SMV Sign Mounting
Advertisement
Table of Contents
