Base Assembly - Alton Evolution Octagonal 9x9 Instruction Manual

Base Assembly

Lay out your aluminium base sections as diagram 1 shows.
The base brackets (EV1001M) attach to the base sections
using the M6 bolts supplied (diagram 2). The bolts slot into
the bolt channel in the aluminium base and fix through the
largest hole in the base bracket. Also slide in bolts and use
them to attach five small base brackets (D174M), one in the
middle of each EV1015M (diagram 3) and one either side of
the door opening (diagram 4).
Diagram 1
EV1014M
Diagram 2
3
Double door? Refer to
special assembly book
Dia. 3
Dia. 4
Internal
6
Top View
Dia. 2
Internal
D174M
Internal
D174M
Diagram 3
Diagram 4