Alton Evolution Octagonal 9x9 Instruction Manual page 44

Gutter Installation
Diagram 107
Silicone Bead
External
Diagram 108
Next you need to apply a bead of silicone
to the internal surfaces of the gutter
section (diagrams 107 and 108).
You can now insert the first gutter joint
(EV1070). Slide this in until the corner in
the middle of the gutter joint meets the
end of the gutter (diagram 107).
Silicone Bead
With this in place you can now prep the
next section of gutter. Apply another
silicone bead to the end that will slide
onto the gutter joint (diagram 108).
EV1031M
Section
13
44