Gutter Installation - Alton Evolution Octagonal 9x9 Instruction Manual

Gutter Installation

Now all the side glass is in place the first section of
gutter to be installed goes above the door (EV1033M).
Make sure the ends of the gutter are evenly spaced
between the centre point of the eaves bracket
(diagram 106). Once you are happy with the position
you can fix it in place with 25mm Pan head screws.
One section of the 2' guttering has large holes at each
end ready for the downpipe (EV1032M), this can be
fitted to one of the four corners of the building. Decide
at the start where you would like this to go.
Diagram 105
Dia. 106
External
13
Diagram 106
43