Door Installation - Alton Evolution Octagonal 9x9 Instruction Manual

Door Installation

Before you can install the door section you need to fit the
door handle. Slide the spindle through the lock to give
you the position of the handle on the door. Fix the
handle with the 3.5 x 25mm countersunk screws
supplied.
Diagram 31
External
Dia. 32
Slot the door section into
the assembly, the internal
surfaces should be flush.
Once in position drill pilot
holes and fix with 50mm
screws (EV0333), suggested
locations shown by the
arrows in diagram 33.
Diagram 33
17
Top View
Diagram 32
5