Alton Evolution Octagonal 9x9 Instruction Manual page 54

Staging Installation (rear)
With both end sections of staging in place you can now fit the infill section. Start by fitting the small
brackets (HE300M) to the rear of the greenhouse (diagram 139 & 140). You will need to remove the
25mm round head screw to fix the brackets on the rear mid rail. As before fix in place with the large
head 25mm screw. Next, attach the staging support bracket (EV1124M) to the extra bolt on the
underside of the long slat (diagram 139).
Diagram 138
Internal
Dia. 140
Dia. 139
HE300M
Diagram 140
EV1124M
HE300M
Diagram 139
15
54