2.1 Activation
Purpose:
For the first-time access, you need to activate the device by setting an admin password. No
operation is allowed before activation.
2.1.1 Activate Web Browser
Step 1 Input the IP address into the address bar of the web browser, and press Enter to enter the
activation interface.
The default IP address of the camera is 192.168.1.64.
The computer and the device should belong to the same network segment.
Step 2 Enter the same password in Password and Confirm.
STRONG PASSWORD RECOMMENDED–We highly recommend you create a strong password of
your own choosing (Using a minimum of 8 characters, including at least three of the following
categories: upper case letters, lower case letters, numbers, and special characters.) in order to
increase the security of your product. And we recommend you reset your password regularly,
especially in the high security system, resetting the password monthly or weekly can better protect
your product.
Step 3 Click OK.
Intelligent Analyzer User Manual
Chapter 2 Start Up Device
Figure 2-1 Activation
8