Chapter 7 Camera Management; Configure Video Parameters; Set Image Parameters - HIKVISION DS-MP1803 User Manual

7.1 Configure Video Parameters

Purpose:
Configure the transmission stream type, the resolution, frame rate, etc.
Step 1 Go to Configuration > Video/Audio.
Step 2 Select Channel No.
Step 3 Configure the video parameters.
 Stream Type
 Main Stream (Normal): Used for continuous recording.
 Main Stream (Event): Used for event recording.
 Sub-Stream: Used for network transmission.
 Video Type
Video and Video & Audio are selectable.
 Bitrate Type
 Variable and Constant are selectable.
 Variable: The video quality is configurable.
 Constant: The video quality is set as Medium and cannot be edited.
 Video Quality
Bitrate type is variable, you can set the video quality as Highest, Higher, Medium, Low, Lower,
or Lowest.
 Frame Rate
Frame rate refers to the frequency of the image frame after compression. With other
parameters constant, reduce the video frame rate, and you can lower the maximum bitrate
to some extent.
 Max. Bitrate(Kbps)
Select the fixed value provided by the system or customize the maximum bitrate as desired.
Step 4 Click Save.

7.2 Set Image Parameters

Step 1 Go to Configuration > Image > Display Settings.
Step 2 Adjust the image parameters.
Intelligent Analyzer User Manual

Chapter 7 Camera Management

30