Table of Contents
Advertisement
3.1 IP Camera Management
3.1.1 Activate IP Camera
Purpose:
Before adding an IP camera, activate it by setting a password for it.
Step 1 Go to Configuration > System > Camera Management.
Step 2 Select an inactivated IP camera.
Step 3 Click Activation.
Step 4 Enter the same password in New Password and Confirm.
STRONG PASSWORD RECOMMENDED – We highly recommend you create a strong password of
your own choosing (Using a minimum of 8 characters, including at least three of the following
categories: upper case letters, lower case letters, numbers, and special characters.) in order to
increase the security of your product. And we recommend you reset your password regularly,
especially in the high security system, resetting the password monthly or weekly can better protect
your product.
Step 5 Click OK.
3.1.2 Add IP Camera
Purpose:
You can add the activated IP cameras. Ensure the device and IP cameras are in the same network
segment.
Step 1 Go to Configuration > System > Camera Management.
Step 2 Add IP camera.
Intelligent Analyzer User Manual
Chapter 3 Basic Operations
Figure 3-1 IP Camera
13
Advertisement
Table of Contents
