Table of Contents
Advertisement
Step 3 Set the limit value for acceleration alarm in X, Y and Z directions.
X, Y and Z represent the direction of acceleration and the unit of alarm value is G (G=9.8 m/s
Step 4 Set the linkage actions for acceleration alarm, including Audible Warning and Alarm Output.
Step 5 Click Save.
5.5 Configure Door Settings
Purpose:
Configure door settings to obtain door status via alarm input.
Step 1 Go to Configuration > Vehicle > Basic Settings > Door Settings.
Step 2 Select Alarm Input Single Type for both front door and rear door.
Step 3 Click Save.
When the detected door status is open, device will turn off driving behavior detection and turn on
people counting.
Intelligent Analyzer User Manual
Figure 5-4 Door Settings
25
2
).
Advertisement
Table of Contents
