Step 2 Enter the device IP Address, Subnet Mask, Default Gateway, DNS Server Address, and
Download Server IP.
Step 3 Click Save.
6.3 Remote Access
6.3.1 Mobile Surveillance Platform
Purpose:
The device can be remotely accessed via mobile surveillance platform. For details of platform
configuration, you can refer to platform user manual.
When your device and mobile surveillance platform are not in the same network segment,
network priority: 3G/4G network > Wi-Fi > wired network.
Before you start:
Create the device ID on the mobile surveillance platform.
Step 1 Go to Configuration > Network > Advanced Settings > Platform.
Step 2 Check Enable.
Step 3 Select Platform Access Mode as Ehome.
Step 4 Configure the following parameters.
Server Address Type: IP Address and Domain Name are selectable.
Server Address: Enter the static IP address of iVMS server.
Port No.: The default value for mobile surveillance platform is 7660.
Device ID: The ID of the device registered on the iVMS server. If you leave it empty, device logs
in to the platform with serial No.
Intelligent Analyzer User Manual
Figure 6-2 Platform Access
27