Reboot; Restore Default Settings; Import/Export Configuration File; Import Configuration File - HIKVISION DS-MP1803 User Manual

Intelligent

Hide thumbs Also See for DS-MP1803:

Table of Contents

Step 2 Click Browser and select upgrade file.

Step 3 Click Upgrade to start upgrading and reboot the device to activate the new settings.

10.4 Reboot

Step 1 Go to Configuration > System > Maintenance > Upgrade & Maintenance.

Step 2 Click Reboot and click OK on popup dialog box to reboot the device.

Step 1 Go to Configuration > System > Maintenance > Upgrade & Maintenance.

Step 2 Click to select the restoring type from the following two options.

 Restore: Restore all parameters, except the network (including IP address, subnet mask,

gateway, MTU, NIC working mode, default route, server port, etc.) and user account

parameters, to the factory default settings.

 Default: Restore all parameters to the factory default settings.

Step 3 Click OK on popup dialog box.

Purpose:

The configuration files of one device can be imported to multiple device devices if they are to be

configured with the same parameters.

Step 1 Go to Configuration > System > Maintenance > Upgrade & Maintenance.

Step 2 Click Browser of Import Config. File section frame and select configuration file to import.

Step 3 Click Import.

Step 4 Click OK on confirmation dialog box.

Purpose:

Intelligent Analyzer User Manual

Figure 10-2 Upgrade

Table of Contents